View TC7MBL6353SFK_8202449.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

tc7mbl6353sft/fk/ftg 2010-02-05 1 toshiba cmos digital integrat ed ci rcuit silicon monolithic tc7mbl6353sft,TC7MBL6353SFK,tc7mbl6353sftg low voltage/low capacitance dual 1-of-2 multiplexer/demultiplexer the tc7mbl6353s is a low voltage/low capacitance cmos dual 1-of-2 multiplexer/demultiple xer. the low on-resistance of the switch allows connections to be made with minimal propagation delay time. this device consists of two indi vidual two-inputs multiplexer/ demultiplexer with common select input (s) and output enable ( oe ). the a input is connected to the b1 or b2 outputs as determined by the combination of both the sele ct input (s) and output enable ( oe ). when the output enable ( oe ) input is held at ?h? level, the switches are open regardless of the stat e of the select inputs, and a high-impedance state exis ts between the switches. all inputs are equipped with prot ection circuits against static discharge. features ? operating voltage: v cc = 1.65 to 3.6 v ? low capacitance: c i/o = 15 pf switch on (typ.) @3 v ? low on-resistance: r on = 9 ? (typ.) @3 v ? esd performance: machine model 200 v human body model 2000 v ? power-down protection for inputs ( oe input only) ? package: tssop14,vssop (us14), vqon16 note : when mounting vqon package, the type of recommended flux is ra or rma. tc7mbl6353sft TC7MBL6353SFK tc7mbl6353sftg vqon16-p-0303-0.50 weight tssop14-p-0044-0.65a : 0.06 g (typ.) vssop14-p-0030-0.50 : 0.02 g (typ.) vqon16-p-0303-0.50 : 0.013 g(typ.)
tc7mbl6353sft/fk/ftg 2010-02-05 2 pin assignment (top view) truth table inputs s oe function x h disconnect l l na port = nb1 port h l na port = nb2 port system diagram ft (tssop14-p-0044-0.65a) fk (vssop14-p-0030-0.50) ftg (vqon16-p-0303-0.50) v cc 9 1b1 1b2 8 14 13 12 11 10 1 2 3 4 5 6 7 2a nc gnd 2b1 2b2 1a nc oe s nc nc 1 2 3 4 1a nc 2a nc 16 15 14 13 nc v cc 5 6 7 8 gnd nc 12 11 10 9 1b2 2b1 2b2 1b1 s nc nc oe oe s 2b1 2a 2b2 1a 1b2 1b1
tc7mbl6353sft/fk/ftg 2010-02-05 3 absolute maximum ratings (note) characteristic symbol rating unit power supply range v cc ? 0.5 to 4.6 v control pin input voltage v in ? 0.5 to 4.6 v switch terminal i/o voltage v s ?0.5 to v cc + 0.5 v control input pin ?50 ma clump diode current switch terminal i ik 50 ma switch i/o current i s 50 ma power dissipation p d 180 mw dc v cc /gnd current i cc /i gnd 100 ma storage temperature t stg ? 65 to 150 c note: exceeding any of the absolute maximum ratings, even br iefly, lead to deterioration in ic performance or even destruction using continuously under heavy loads (e.g. the app lication of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operat ing temperature/current/voltage, etc. ) are within the absolute maximum ratings and the operating ranges. please design the appropriate reliability upon reviewing the toshiba semiconductor reliability handbook (?handling precautions?/?derating concept and methods?) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). operating ranges (note) characteristic symbol rating unit power supply voltage v cc 1.65 to 3.6 v control pin input voltage v in 0 to 3.6 v switch i/o voltage v s 0 to v cc v operating temperature t opr ? 40 to 85 c input rise and fall time dt/dv 0 to 10 ns/v note: the operating ranges must be maintained to ensure the normal oper ation of the device. unused inputs must be tied to either v cc or gnd.
tc7mbl6353sft/fk/ftg 2010-02-05 4 electrical characteristics dc characteristics (ta = ? 40 to 85c) parameter symbol test condition v cc (v) min typ. max unit ?h? level v ih ? 1.65 to 3.6 0.7 v cc ? ? input voltage ?l? level v il ? 1.65 to 3.6 ? ? 0.3 v cc v input leakage current ( oe , s) i in v in = 0 to 3.6v 1.65 to 3.6 ? ? 1.0 a power-off leakage current i off oe = 0 to 3.6 v 0 ? ? 1.0 a off-state leakage current (switch off) i sz a, b = 0 to v cc , oe = v cc 1.65 to 3.6 ? ? 1.0 a v is = 0 v, i is = 30 ma (note1) 3.0 ? 9 13 v is = 3.0 v, i is = 30 ma (note1) 3.0 ? 15 20 v is = 2.4 v, i is = 15 ma (note1) 3.0 ? 19 27 v is = 0 v, i is = 24 ma (note1) 2.3 ? 10 16 v is = 2.3 v, i is = 24 ma (note1) 2.3 ? 17 24 on resistance (note2) r on v is = 2.0 v, i is = 15 ma (note1) 2.3 ? 21 30 quiescent supply current i cc v in = v cc or gnd, i out = 0 3.6 ? ? 10 a note1: all typical values are at ta=25 c. note2: measured by the voltage drop between a and b pins at the indicated current through the switch. on resistance is determined by the lower of the voltages on the two (a or b) pins. ac characteristics (ta = ? 40 to 85c) characteristics symbol test condition v cc (v) min max unit 3.3 0.3 ? 6 2.5 0.2 ? 7 propagation delay time (s to bus) t plh t phl figure 1, figure 2 1.8 0.15 ? 11 ns 3.3 0.3 ? 6 2.5 0.2 ? 7 output enable time ( oe to bus) t pzl t pzh figure 1, figure 3 1.8 0.15 ? 11 ns 3.3 0.3 ? 6 2.5 0.2 ? 7 output enable time (s to bus) t pzl t pzh figure 1, figure 3 1.8 0.15 ? 11 ns 3.3 0.3 ? 6 2.5 0.2 ? 7 output disable time ( oe to bus) t plz t phz figure 1, figure 3 1.8 0.15 ? 11 ns 3.3 0.3 ? 6 2.5 0.2 ? 7 output disable time (s to bus) t plz t phz figure 1, figure 3 1.8 0.15 ? 11 ns
tc7mbl6353sft/fk/ftg 2010-02-05 5 capacitive characteristics (ta = 25c) characteristics symbol test condition v cc (v) typ. unit control pin input capacitance ( oe , s) c in 3.0 3 pf switch terminal capacitance (b1, b2) c i/o oe = v cc (switch off) 3.0 6 pf switch terminal capacitance (a) c i/o oe = v cc (switch off) 3.0 9 pf switch terminal capacitance c i/o oe = gnd (switch on) 3.0 15 pf note: this parameter is guaranteed by design ? r on characteristic (typ.) ta=25 0 5 10 15 20 25 30 35 40 00.511.522.53 v is (v) r on () v cc = 2.3v v cc = 3.0v
tc7mbl6353sft/fk/ftg 2010-02-05 6 ac test circuit ac waveform parameter switch t plh , t phl open t plz , t pzl 2 v cc t phz , t pzh gnd o p en 2 v cc gnd switch out p ut measure c l = 50 pf r l = 500 r l r l c l figure 1 90% 10% v ol v oh gnd v cc 50% t phz t pzh t r 2.5 ns t f 2.5 ns 50% v ol v oh outputs enabled 50% t plz t pzl 90% outputs disabled outputs enabled output enable (s, oe ) output (a, b) low to off to low output (a, b) high to off to high 10% figure 3 t plz , t phz , t pzl , t pzh 90% 10% input (s) gnd v cc t r 2.5 ns t f 2.5 ns 50% output (a, b) v ol v oh 50% t plh t phl figure 2 t plh , t phl
tc7mbl6353sft/fk/ftg 2010-02-05 7 rise and fall times (tr / tf) of the tc7mbl6353s i/o signals the tr(out) and tf(out) values of the output signals are affected by the cr time constant of the input, which consists of the switch terminal capacitance (c i/o ) and the on-resistance (r on ) of the input. in practice, the tr(out) and tf(out) values are also affect ed by the circuit?s capacitance and resistance components other than those of the tc7mbl6353s. the tr(out) / tf(out) values can be approximated as follows. (figure 4 shows the test circuit.) tr(out) / tf(out) (approx) = - ( c i/o + c l ) ? (r drive+ r on ) ? ln ( ( ( v oh ? v ol ) ? v m ) / ( v oh ? v ol ) ) where, r drive is the output impedance of the previous-stage circuit. calculation example: tr(out) (approx) = - ( 15 + 15 )e-12 ? ( 120 + 9) ? ln ( ( ( 3.0 - 0 ) ? 1.5 ) / ( 3.0 ? 0 ) ) 2.7 ns calculation conditions: v cc = 3.0v , c l = 15pf , r drive = 120 ? (output impedance of the previous ic), v m = 1.5v (v cc / 2) output of the previous ic = digital (i.e., high-level voltage = v cc ; low-level voltage = gnd) v cc parameter 3.3 0.3 v 2.5 0.2 v 1.8 0.15 v v m v cc / 2 v cc / 2 v cc / 2 figure 4 test circuit measure c l an/bn c i/o (switch on) tc7mbl6353s r drive previous ic bn/an r drive = output impedance of the previous ic = r on v ol v oh v m tr out v m measure c l r drive previous ic r drive = output impedance of the previous ic v cc gnd waveform generated without the tc7mbl6353s tf out waveform generated with the tc7mbl6353s added
tc7mbl6353sft/fk/ftg 2010-02-05 8 package dimensions weight: 0.06 g (typ.)
tc7mbl6353sft/fk/ftg 2010-02-05 9 package dimensions weight: 0.02 g (typ.)
tc7mbl6353sft/fk/ftg 2010-02-05 10 package dimensions weight: 0.013 g (typ.)
tc7mbl6353sft/fk/ftg 2010-02-05 11 restrictions on product use ? toshiba corporation, and its subsidiaries and affiliates (collect ively ?toshiba?), reserve the right to make changes to the in formation in this document, and related hardware, software a nd systems (collectively ?product?) without notice. ? this document and any information herein may not be reproduc ed without prior written permission from toshiba. even with toshiba?s written permission, reproduc tion is permissible only if reproducti on is without alteration/omission. ? though toshiba works continually to improve product?s quality and reliability, product can malfunction or fail. customers are responsible for complying with safety standards and for prov iding adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a ma lfunction or failure of product could cause loss of human life, b odily injury or damage to property, including data loss or corruption. before customers use the product, create designs including the product, or incorporate the product into their own applications, cu stomers must also refer to and comply with (a) the latest versions of all relevant toshiba information, including without limitation, this document, the specifications, the data sheets and application notes for product and the precautions and condi tions set forth in the ?toshiba semiconductor reliability handbook? and (b) the instructions for the application with which the product will be us ed with or for. customers are solely responsible for all aspe cts of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this product in such design or applications; (b) eval uating and determining the applicability of any info rmation contained in this document, or in c harts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operatin g parameters for such designs and applications. toshiba assumes no liability for customers? product design or applications. ? product is intended for use in general el ectronics applications (e.g., computers, personal equipment, office equipment, measur ing equipment, industrial robots and home electroni cs appliances) or for specif ic applications as expre ssly stated in this document . product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality a nd/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or se rious public impact (?unintended use?). unintended use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic s ignaling equipment, equipment used to control combustions or explosions, safety dev ices, elevators and escalato rs, devices related to el ectric power, and equipment used in finance-related fields. do not use product for unintended use unless specifically permitted in thi s document. ? do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy product, whether in whole or in part. ? product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. ? the information contained herein is pres ented only as guidance for product use. no re sponsibility is assumed by toshiba for an y infringement of patents or any other intellectual property rights of third parties that may result from the use of product. no license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. ? a bsent a written signed agreement, except as provid ed in the relevant terms and conditions of sale for product, and to the maximum extent allowable by law, toshiba (1) assumes no liability whatsoever, including without limitation, indirect, co nsequential, special, or incidental damages or loss, including without limitation, loss of profit s, loss of opportunities, business interruption and loss of data, and (2) disclaims any and all express or implied warranties and conditions related to sale, use of product, or information, including warranties or conditions of merchantability, fitness for a particular purpose, accuracy of information, or noninfringement. ? do not use or otherwise make available product or related so ftware or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or m anufacturing of nuclear, chemical , or biological weapons or missi le technology products (mass destruction w eapons). product and related software and technology may be controlled under the japanese foreign exchange and foreign trade law and the u.s. expor t administration regulations. ex port and re-export of product or related software or technology are strictly prohibited exc ept in compliance with all applicable export laws and regulations. ? please contact your toshiba sales representative for details as to environmental matters such as the rohs compatibility of pro duct. please use product in compliance with all applicable laws and regula tions that regulate the inclusion or use of controlled subs tances, including without limitation, the eu rohs directive. toshiba assumes no liability for damages or losses occurring as a result o f noncompliance with applicable laws and regulations.

▲Up To Search▲

Price & Availability of TC7MBL6353SFK

	To Download TC7MBL6353SFK Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .